• Kenwood DDX-6039 TouchScreen MONITOR System (CD/ MP3/ DVD)
• Kenwood "KEG" MP3 Hard Drive Storage - 40GB
• Kenwood KNA-G510 GPS & Navigation System
• Kenwood HD FM Radio System
• Kenwood CCD-900 Rear Camera (pic at bottom of page)
• MTX 8000 10" subwoofers (2) + custom enclosure
• MTX 6532 Speakers
• MTX 900W 4 channel Amplifier
• MTX Subwoofer Amplifier 450W
• MTX CROSSOVER RT-X02A
• X-Static BatCap 400 amps
• Infinity Kappa Speakers 60.5 door and tweeters
• Infinity Kappa Speakers 63.5 three way
• DynaMat installed throughout for soundproofing

Here are some pictures of some of the components. I recently went with a full DIN touchscreen Kenwood system to gain room for the custom install of electronics. The old Kenwood and Alpine Sound Processor put out awesome sound but took up more room with (2) 1/2 DIN units.

The Kenwood DVD with touchscreen controls works very well. It is also hooked up to the rear camera (comes on automatically when in reverse or you can select it manually). I added the Navigation package (Garmin) and it is great. A pretty good navigation package indeed.

The rear woofer install was customized so I did NOT have to lose spare tire or normal storage space. Worked out very well with a fiberglassed enclosure and custom panels. All panels are press fitted exactly and do not require screws or anything (and no squeeks either!).

Note: I get asked a lot - "could you build one for me?". No, I really can't. The amount of time would preclude it being priced reasonably.